Shapes: PEEKS

1: PEEK natural

Unfilled PEEK

PEEK natural is a high-performance, semi-crystalline thermoplastic manufactured from high-performance virgin PEEK polymer. As the most prominent member of the polyaryletherketone group, it combines exceptional wear resistance with superior mechanical properties, even under extreme thermal loads.

Its profile is defined by outstanding chemical resistance and a high operating temperature (up to 260°C), making it a universal choice for highly stressed parts. The material’s excellent dimensional stability and creep resistance support the production of the most sophisticated machined components. It is available as rod, plate, and tube.

2: PEEK GF30 natural

30% Glass Fibre Reinforced PEEK

PEEK GF30 natural is a 30% glass fibre reinforced material that offers significantly higher rigidity and creep strength than unfilled PEEK. The glass fibre reinforcement provides excellent dimensional stability and high mechanical strength at elevated temperatures, making it ideal for structural parts in demanding environments.

The material excels in chemical resistance and maintains its properties under high thermal loads (up to 260°C). It is specifically engineered for applications requiring high static loads over long periods in high-temperature conditions. Typical applications include chemical plant engineering and aerospace technology.

3: PEEK CF30 black

30% Carbon Fibre Reinforced PEEK

PEEK CF30 black is a carbon fibre reinforced PEEK that provides the highest levels of stiffness and creep strength. The 30% carbon fibre reinforcement significantly increases the material’s thermal conductivity and mechanical strength, while also providing a lower coefficient of linear thermal expansion compared to glass-filled grades.

This black variant is optimized for high-performance applications where weight reduction and extreme rigidity are paramount. It offers exceptional wear resistance and is highly resistant to aggressive chemicals. Its superior thermal and mechanical profile makes it the go-to material for critical components in the oil & gas and automotive industries.

4: PEEK PVX black

Bearing Grade PEEK

PEEK PVX black is a high-performance bearing material specifically formulated with an optimum combination of carbon fibres, PTFE, and graphite. This unique filler combination ensures exceptional sliding and wear properties, even under high pressure and velocity (PV) conditions.

It is specifically designed to resist high frictional heat and is suitable for high-temperature environments. The material maintains high dimensional stability and excellent chemical resistance. Typical areas of application include plain bearings, bushings, and wear strips in the mechanical and automotive engineering sectors.

5: PEEK RP natural

Reprocessed PEEK

PEEK RP natural is the environmentally conscious alternative to conventional PEEK, part of Façade Creations’ “Reuse for Tomorrow” range. It consists of high-quality reprocessed PEEK by-products from customer take-backs, resulting in a significantly optimized CO2 footprint without sacrificing performance.

The material is comparable to the unfilled fossil-based version, characterized by outstanding mechanical properties and chemical resistance at temperatures up to 260°C. It offers high creep resistance and dimensional stability, making it perfectly suited for demanding machined parts in chemical technology and mechanical engineering.

6: PEEK MT blue

Medical Grade PEEK

PEEK MT blue is a high-performance medical grade plastic specifically developed for the healthcare industry. This blue-coloured PEEK offers excellent resistance to common sterilization methods, including superheated steam, ethylene oxide, and gamma radiation. Its high chemical resistance makes it ideal for surgical instruments and medical devices.

The material provides the same superior mechanical properties as standard PEEK, including high strength and stiffness at elevated temperatures. The blue pigmentation facilitates quick visual identification during medical procedures. It is biocompatible and suitable for applications requiring skin and tissue contact for up to 24 hours.

7: PEEK MT black

Medical Grade PEEK

PEEK MT black is a medical-grade thermoplastic designed to meet the rigorous demands of the medical technology sector. Like its blue counterpart, this black PEEK variant is characterized by its outstanding resistance to repeated autoclave cycles and chemical disinfectants, ensuring a long service life for reusable medical components.

It maintains high dimensional stability and mechanical performance under extreme thermal conditions. The material is tested for biocompatibility and is frequently used for surgical tools, dental components, and diagnostic equipment. Its black color provides a sleek, professional finish for high-end medical instrumentation.

8: PEEK ELS nano black

Conductive Carbon Nanotube PEEK

PEEK ELS nano black is a high-performance PEEK material modified with carbon nanotubes to provide excellent electrical conductivity. Unlike traditional carbon-filled plastics, the use of nanotechnology ensures a more uniform conductive network, resulting in consistent surface and volume resistivity across the entire part.

The material retains the core strengths of PEEK, such as exceptional heat resistance and chemical stability. It is specifically designed for the semiconductor and electronics industries, where static dissipation and high-temperature performance are critical. Its low outgassing properties also make it suitable for cleanroom environments.

9: PEEK TF10 blue

PTFE Modified PEEK

PEEK TF10 blue is a PEEK material containing 10% PTFE, specifically engineered to improve sliding and friction characteristics. The addition of PTFE significantly reduces the coefficient of friction and enhances the material’s wear resistance, particularly in applications involving continuous sliding motion or high-pressure contact.

The blue pigmentation makes this material easily detectable and visually distinct within industrial assemblies. It maintains the high thermal and chemical resistance typical of the PEEK family. Typical applications include high-load bushings, wear rings, and seals used in the chemical processing and food industries.

10: PEEK ST black

High-Temperature PEEK (PEK)

PEEK ST black is manufactured from polyetherketone (PEK), a material that offers a higher glass transition temperature and melting point than standard PEEK. This allows the material to maintain its mechanical strength and stiffness at even higher temperatures, providing a safety margin for the most extreme thermal environments.

It features the same excellent chemical resistance and high dimensional stability as standard PEEK grades but with enhanced performance in load-bearing applications above 150°C. This makes it the ideal choice for critical components in the aerospace, automotive, and oil & gas sectors where thermal limits are constantly pushed.

11: PEEK UD blue

Ultra Detectable PEEK

PEEK UD blue is a high-performance plastic specifically designed for the food and pharmaceutical industries. This material is “Ultra Detectable,” meaning it contains additives that allow it to be picked up by metal detectors, X-ray inspection systems, and optical sensors. This ensures that any material fragment in the production line is immediately identified.

The material retains PEEK’s signature high-temperature resistance and chemical stability. It is fully compliant with food contact regulations (FDA and EU 10/2011). Typical applications include scraper blades, mixers, and conveyor components where safety and contamination prevention are non-negotiable.

12: PEEK ID blue

Inductively Detectable PEEK

PEEK ID blue is a specialized PEEK grade featuring an inductively detectable filler. This allows standard metal detection equipment to identify even the smallest plastic fragments during food processing. The blue color further enhances optical detectability, providing a dual layer of safety for high-speed production environments.

This material is engineered to withstand aggressive cleaning agents and repeated thermal cycling without degrading. Its high mechanical strength and wear resistance make it ideal for high-load components in food processing machinery. It meets all major global requirements for food-grade materials.

13: PEEK CMF white

Ceramic Modified PEEK

PEEK CMF white is a composite material based on PEEK and high-purity ceramic. This modification results in a material with extremely high hardness and exceptional dimensional stability. It exhibits very low thermal expansion, which is critical for precision components that must maintain their exact shape under fluctuating temperatures.

The ceramic filler also provides excellent electrical insulation and high resistance to wear. It is primarily used in the semiconductor industry for test sockets, nests, and insulators, as well as in the electronics industry for precision mechanical parts that require tight tolerances and high-temperature stability.

14: PEEK MT white

Medical Grade PEEK (MT)

PEEK MT white is a high-performance medical-grade plastic based on medical-grade PEEK. This material is specifically tested for biocompatibility and is suitable for medical applications with blood or tissue contact for up to 30 days. It offers the high mechanical strength and chemical resistance required for demanding clinical environments.

The material’s white color provides an aesthetic, clean look for medical devices. It is highly resistant to all standard sterilization methods, including high-pressure steam and gamma radiation. Common applications include dental healing caps, trial implants, and temporary medical components.

15: PEEK CMP natural

Chemical Mechanical Planarization PEEK

PEEK CMP natural is engineered specifically for the semiconductor industry, particularly for use in CMP (Chemical Mechanical Planarization) processes. The material offers exceptional wear resistance and is highly resistant to the abrasive slurries and chemicals used in wafer polishing.

Its high purity and low outgassing characteristics ensure that it does not contaminate sensitive electronic components. The material provides high dimensional stability and a low coefficient of friction, ensuring consistent performance in high-precision manufacturing environments.

16: PEEK GF30 black

30% Glass Fibre Reinforced PEEK (Black)

PEEK GF30 black is the black-coloured variant of the 30% glass fibre reinforced PEEK. The glass fibre reinforcement provides a massive jump in stiffness and dimensional stability compared to unfilled grades. This material is designed to handle high static loads over long periods at temperatures exceeding 150°C.

The black color is often preferred for mechanical engineering and automotive applications for aesthetic reasons or material identification. It offers excellent resistance to hydrolysis and high-energy radiation, making it suitable for structural parts in harsh outdoor or industrial environments.

17: PEEK ELS black

Electrically Conductive PEEK

PEEK ELS black is a high-performance PEEK grade specifically modified with high-conductivity carbon black. This modification ensures reliable electrical conductivity with a surface resistivity of 106 to 109 Ω10^9\ \Omega109 Ω. It is the industry standard for preventing static discharge (ESD) in high-temperature environments, which is critical for the semiconductor and electronics sectors.

While providing conductive properties, the material retains the core strengths of PEEK, including exceptional heat resistance and dimensional stability. It is engineered to withstand aggressive chemical environments and high mechanical stress without losing its conductive network. This makes it ideal for carrier systems and components in cleanroom and vacuum applications.

18: PEEK HT black

High-Temperature PEEK (PEK) PEEK HT black is manufactured from Polyetherketone (PEK), a high-performance material that pushes thermal limits even further than standard PEEK. It offers a higher glass transition and melting point, allowing the material to maintain its superior strength and stiffness at extreme temperatures. It provides a significant safety margin for the most demanding thermal loads.

It features excellent chemical resistance and high dimensional stability, making it the premier choice for critical components in the aerospace, automotive, and oil & gas sectors. This material is designed for structural parts where mechanical performance cannot be compromised, even when operating at the edge of high-performance plastic thermal limits.